電動起錨系纜絞盤 Electric capstan 采用電動機（液壓馬達）等帶動擺線針輪減速機調速，驅動絞纜筒作正（反）轉。產品按GB/T4555-1995設計、制造。產品經過多國船級社檢驗，國內市場占有率達75%以上。性能穩定， The motor (motor) and drive the cycloid pin wheel reducer drive, the drive sheave tube is (anti). Products according to GB/T4555-1995 design, manufacturing. Products through the countries Veritas test, the domestic market share of more than 75%. Stable performance, 用途：產品安裝在艦船首、艉部主甲板上，在艦船起航時起錨或收纜，艦船停航拋錨、緊纜定位，為船舶系泊安全設備. Use: the product is installed in the first, the ship stern main deck, anchor or cable collecting in ship set sail, the ship broke down, suspended cable tightening positioning, as the ship mooring safety equipment 分類： Classification: 1、 按形式分為電動和液壓。 1, the form is divided into electric and hydraulic. 2、 按用途分為系纜絞盤和錨絞盤。 2, divided by use of mooring winch and anchor winch. 組成：采用耐磨船用錨鏈輪、船用行星減速機、進口船用帶剎車電機、主令電氣控制箱、主令控制器為IP56型及無石棉環保剎車帶等組成。 Composition: it is wear resistant marine anchor chain wheel, marine planetary reducer, import the marine band brake motor, main electric control box, a master controller for IP56 and non asbestos brake band composed of environmental protection. 主要技術參數: Main technical parameters: 1、錨鏈直徑：12.5—66mm 1, the diameter of anchor chain: 12.5 - 66mm 2、工作負荷：5.5—123kN 2, work load: 5.5 - 123kN 3、絞車?yán)Γ?.5—110kN 3, winch pull: 5.5 - 110kN 4、電機功率：3—45KW 4, motor power: 3 - 45KW